This is the product for protecting the cargo area of your sport utility vehicle, van or station wagon. Increase the resale value of your vehicle by keeping it showroom clean. With an ORIGINAL HATCHBAG CARGO AREA LINER, you will never worry again about spills, ground in mud, pet hair, chemicals, food or oil stains. The Hatchbag(TM) Cargo Area Liner, is a tough and durable liner which is custom fitted to your Sport Utility Vehicle(SUV), Station Wagon, or Mini-Van. Made of heavy duty PVC covered nylon, your Hatchbag(TM) Liner will keep dirt and spills off of your vehicles upholstery. You can carry mulch, bricks, paint, just about anything without worrying about keeping your vehicle "showroom" clean. To clean your Hatchbag(TM) simply take it out and hose it down.
Please note for proper fit: It is critical that the area be cleaned with the lacquer thinner before attaching the velcro. It should be wiped several times at each location then let dry. If these are squares for the net, customer should mark with a pencil the center of area he has cleaned, as sometimes you can't tell where your cleaned area is located. You may want to refer back to this description when you receive your item so that you don't have to purchase new velcro.

Features:

Custom Fitted to your vehicles specific make and model Over 250 patterns 20 mil PVC covered nylon material Tearproof Waterproof Velcro style attachments make it easy to take out and put back in Optional Twistlock Mounting Kit for heavy duty installation The Velcro attaches to the interior molding. It is not permanent. There is no glue, epoxy, or dyes that can damage the vehicle. When ready to remove them permanently, any sticky residue remaining can be cleaned with alcohol, or any citrus oil cleaners.

Regular size fits station wagons and 4x4's with 2nd seat up. Full size fits station wagons, 4x4's and minivans with 2nd seat down.

Sorry, we dont have a liner that will fit the Pontiac Aztek.

If you have a 2000 GM Tahoe/Yukon, please indicate on your invoice after checkout if you have a new body or old body style.

Please complete information in all fields so we can process your order for a customized fit. Remember to indicate the vehicle Make, Model and Year.

TIPS AND HINTS
FOR LINERS AND NETS

• CLEANING This is very critical and the newer the vehicle, the more careful you must be in removing the silicone from the surface of the plastic/vinyl. Use a clean cloth and wipe each area where an adhesive patch will adhere. Clean 6-7 times at each location using a clean area of cloth with lacquer thinner and wiping just a few seconds. This will soften the silicone and lift a little off with each treatment. If the adhesive does not adhere to the surface, then all this silicone was not removed. Repeat the cleaning instructions again.* REMOVING Adhesives The velcro type adhesives that mount to the vehicle are not permanent. There is no apoxy, glue or dyesWhen you get ready to remove them permanently, any residue that remains can be easily removed with any household cleanerTaking off this sticky residue over the years, a good solution of hot soapy (powdered detergent works best) water, then wipe with alcohol does a good job.You will never know they were there, but the interior of the vehicle will look just the same as when you drove it off the dealers lot..

* We have used our liner for years in our Suburban and have found that loosening the plastic molding that holds the carpet down in the back and slipping the end of the liner under this piece and tightening it back down, holds the liner in place and keeps any dirt, sand, or grit from working underneath. * If you are using your cargo area to slide crates or boxes in and out, you may want to put 3 strips of the hook(hard) side of a velcro type fastener on the bottom of the liner and press it into the carpet to keep the liner from slipping when sliding items in and out3 Pieces cut the width of the bottom and placed on bottom of liner spaced evenly from front to back will give a good secure hold.